Skip to content

Using the DCTEdu simulator

Pick a robot and a mission, snap blocks together, read the sensor panel, then see the C++.

For robot ownersCikoMomo15 min

Start

  1. 1

    Choose Ciko or Momo, then pick a mission.

  2. 2

    Read the mission goals beside the arena. Each goal gets a tick when you reach it.

Build and run

  1. 1

    Drag blocks from the categories under the when-started block.

  2. 2

    Press Run. The block that is running lights up.

  3. 3

    Watch the sensor panel: line, distance, OLED face, turn signals, and sound.

To the real robot

  1. 1

    Open the C++ code below the arena to see the same program in C++.

  2. 2

    Test it on the real robot and compare the result with the simulator.

Note: Real floors can be slipperier or brighter; adjust the speed and sensor thresholds.